2.0mm Locking Plate
The StahlmannPro 2.0mm Locking Plate includes ten titanium plate designs with different shapes, lengths and hole arrangements. Explore adaption, straight, condylar, rotation correction and mini plate options, then use the individual specification tables to identify the product reference required for your enquiry.
This category brings the plate range together for healthcare professionals, hospitals and orthopaedic distributors. The associated 2.0mm locking and cortical screws are organised separately in the 2.0mm Screws category. Product selection must follow the intended use and component requirements of the particular device.
Titanium Plate Designs in the Range
The Y Adaption Locking Plate has 7 shaft holes and 3 head holes, while the T Adaption Locking Plate has 7 shaft holes and 2 head holes. Both feature compression and locking holes. Their catalogue pages describe an adaption design that can be bent in two directions and twisted to accommodate small-bone anatomy. Any contouring must follow the applicable device instructions.
The separate T Locking Plate has four table entries, with lengths of 32.1, 38.9, 45.7 and 52.5 mm. Its table and specification sentence differ on the head and shaft hole counts. Confirm the configuration against current product documentation when requesting this model.
The Rotation Correction Locking Plate is available in 34 mm and 40 mm lengths, with 4 or 5 shaft holes respectively and 2 head holes. The catalogue describes an elongated transverse shaft hole for inspection of reduction and rotational-axis correction when necessary.
Straight and Adaption Straight Plates
The Straight Locking Plate offers 4, 5, 6, 7, 8 or 10 shaft holes, corresponding to lengths of 31, 38, 45, 52, 59 and 73 mm. It features compression and locking holes and is distinct from the two 12-hole adaption products.
The Adaption Straight Locking Plate measures 81.26 mm and uses reference 4-312-12Ti. The Adaption Straight Plate measures 71 mm and uses 4-316-12Ti. Both have 12 shaft holes, so the full name, length and reference are important when identifying the required model.
Condylar and Mini Plate Options
The Condylar Locking Plate has 2 head holes with a choice of 4, 5, 6 or 7 shaft holes. The listed lengths are 33.6, 40.4, 47.2 and 54.0 mm. Its catalogue applications include proximal and distal partial articular fractures of the hand phalanges involving the medial or lateral unicondyle.
The Mini Condylar Plate is a separate left/right design. Both versions have 7 holes and an overall height listed as 29mm. The left plate uses reference 4-314-07L-Ti, while the right uses 4-314-07R-Ti.
The Mini H Plate has 4 holes and external dimensions of 11 x 12mm. The catalogue lists small osteotomies and fractures for this model. External dimensions should not be interpreted as a plate thickness measurement.
Confirming Screw and Instrument Requirements
Most plate pages explicitly state support for 2.0mm cortical and locking screws. The Rotation Correction page does not provide that compatibility statement, so its screw and instrument requirements should be confirmed separately.
For the Condylar Locking Plate, the main specification states 2.0mm cortical and locking screws, while a later line also mentions 1.5/2.0mm cortical screws. Ask for the current approved component specification, especially if requesting the additional 1.5mm option. Nominal diameter alone does not establish compatibility between different systems.
Request Plate Specifications and Pricing
Open the product details to review the original size table, then include the full product name, reference and quantity in your enquiry. State the length, hole arrangement and side where applicable. For items needing clarification, request the current specification before confirming your order.
Contact StahlmannPro with the required configuration and delivery destination to request pricing, availability and supporting documentation for the 2.0mm Hand System.
