WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
he 7.0mm Cannulated Cancellous Screw is an orthopedic fixation screw for large-fragment fractures, including femoral neck and intercondylar femoral fractures. Available in titanium and stainless steel, it accepts a 2.0mm guide wire and uses a standard 3.5mm hexagonal drive.
The cannulated shaft allows insertion over a 2.0mm guide wire. This guides the screw along the selected trajectory during fixation. The standard 3.5mm hexagonal drive accommodates a matching screwdriver.
The hemispherical head supports annular contact with washers and plates when the screw is angled. Its low profile helps reduce the possibility of soft tissue irritation around the screw head.
For partially threaded screws, matching the thread length to the far bone fragment supports interfragmentary compression. The catalogue lists 16mm and 32mm thread options, alongside a fully threaded configuration.
Deep cancellous cutting threads with a large pitch increase resistance to pullout. The large pitch also supports faster insertion and removal.
he 7.0mm Cannulated Cancellous Screw is an orthopedic fixation screw for large-fragment fractures, including femoral neck and intercondylar femoral fractures. Available in titanium and stainless steel, it accepts a 2.0mm guide wire and uses a standard 3.5mm hexagonal drive.
The cannulated shaft allows insertion over a 2.0mm guide wire. This guides the screw along the selected trajectory during fixation. The standard 3.5mm hexagonal drive accommodates a matching screwdriver.
The hemispherical head supports annular contact with washers and plates when the screw is angled. Its low profile helps reduce the possibility of soft tissue irritation around the screw head.
For partially threaded screws, matching the thread length to the far bone fragment supports interfragmentary compression. The catalogue lists 16mm and 32mm thread options, alongside a fully threaded configuration.
Deep cancellous cutting threads with a large pitch increase resistance to pullout. The large pitch also supports faster insertion and removal.
| Length (mm) | Stainless Steel | Titanium |
|---|---|---|
| 30 | 7-250-30 | 7-250-30Ti |
| 35 | 7-250-35 | 7-250-35Ti |
| 40 | 7-250-40 | 7-250-40Ti |
| 45 | 7-250-45 | 7-250-45Ti |
| 50 | 7-250-50 | 7-250-50Ti |
| 55 | 7-250-55 | 7-250-55Ti |
| 60 | 7-250-60 | 7-250-60Ti |
| 65 | 7-250-65 | 7-250-65Ti |
| 70 | 7-250-70 | 7-250-70Ti |
| 75 | 7-250-75 | 7-250-75Ti |
| 80 | 7-250-80 | 7-250-80Ti |
| 85 | 7-250-85 | 7-250-85Ti |
| 90 | 7-250-90 | 7-250-90Ti |
| 95 | 7-250-95 | 7-250-95Ti |
| 100 | 7-250-100 | 7-250-100Ti |
| 105 | 7-250-105 | 7-250-105Ti |
| 110 | 7-250-110 | 7-250-110Ti |
| 115 | 7-250-115 | 7-250-115Ti |
| 120 | 7-250-120 | 7-250-120Ti |
| Length (mm) | Stainless Steel | Titanium |
|---|---|---|
| 35 | 7-260-35 | 7-260-35Ti |
| 40 | 7-260-40 | 7-260-40Ti |
| 45 | 7-260-45 | 7-260-45Ti |
| 50 | 7-260-50 | 7-260-50Ti |
| 55 | 7-260-55 | 7-260-55Ti |
| 60 | 7-260-60 | 7-260-60Ti |
| 65 | 7-260-65 | 7-260-65Ti |
| 70 | 7-260-70 | 7-260-70Ti |
| 75 | 7-260-75 | 7-260-75Ti |
| 80 | 7-260-80 | 7-260-80Ti |
| 85 | 7-260-85 | 7-260-85Ti |
| 90 | 7-260-90 | 7-260-90Ti |
| 95 | 7-260-95 | 7-260-95Ti |
| 100 | 7-260-100 | 7-260-100Ti |
| 105 | 7-260-105 | 7-260-105Ti |
| 110 | 7-260-110 | 7-260-110Ti |
| 115 | 7-260-115 | 7-260-115Ti |
| 120 | 7-260-120 | 7-260-120Ti |
| Length (mm) | Stainless Steel | Titanium |
|---|---|---|
| 30 | 7-270-30 | 7-270-30Ti |
| 35 | 7-270-35 | 7-270-35Ti |
| 40 | 7-270-40 | 7-270-40Ti |
| 45 | 7-270-45 | 7-270-45Ti |
| 50 | 7-270-50 | 7-270-50Ti |
| 55 | 7-270-55 | 7-270-55Ti |
| 60 | 7-270-60 | 7-270-60Ti |
| 65 | 7-270-65 | 7-270-65Ti |
| 70 | 7-270-70 | 7-270-70Ti |
| 75 | 7-270-75 | 7-270-75Ti |
| 80 | 7-270-80 | 7-270-80Ti |
| 85 | 7-270-85 | 7-270-85Ti |
| 90 | 7-270-90 | 7-270-90Ti |
| 95 | 7-270-95 | 7-270-95Ti |
| 100 | 7-270-100 | 7-270-100Ti |
| 105 | 7-270-105 | 7-270-105Ti |
| 110 | 7-270-110 | 7-270-110Ti |
| 115 | 7-270-115 | 7-270-115Ti |
| 120 | 7-270-120 | 7-270-120Ti |
The screw accepts a 2.0mm guide wire and uses a standard 3.5mm hexagonal drive.
The supplied catalogue lists titanium and stainless steel versions with 16mm threads, 32mm threads and full threads. All three configurations are labelled self-drilling.
For partially threaded screws, the threaded portion must engage the far bone fragment to support interfragmentary compression. Different thread lengths help match that engagement to the fragment dimensions.
