WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
Specifications
• Cannulated shaft accepts guide wires of 1.2mm
• Hemispherical head of the screws ensures optimal annular contact with washers and
plates when screws are angled
• Low-profile head reduces possibility of soft tissue irritation
• Thread profile designed to provide pullout resistance and insertion efficiency similar
to those of the standard 3.5mm cortex screw
• Fully threaded screws are intended to stabilize fractures where little to no
compression across the fracture site is needed.
• Length ranges from 10mm-50mm with a diameter of 3.5mm.
• Available in both Titanium and Stainless Steel
Indications for use
Fixation of fractures with small fragments, eg.-
• Wrist fractures
• Metacarpal and metatarsal fractures and fixation in metacarpal and metatarsal
osteotomies
• Tarsals fractures
• Transcondylar humeral fractures in children
Specifications
• Cannulated shaft accepts guide wires of 1.2mm
• Hemispherical head of the screws ensures optimal annular contact with washers and
plates when screws are angled
• Low-profile head reduces possibility of soft tissue irritation
• Thread profile designed to provide pullout resistance and insertion efficiency similar
to those of the standard 3.5mm cortex screw
• Fully threaded screws are intended to stabilize fractures where little to no
compression across the fracture site is needed.
• Length ranges from 10mm-50mm with a diameter of 3.5mm.
• Available in both Titanium and Stainless Steel
Indications for use
Fixation of fractures with small fragments, eg.-
• Wrist fractures
• Metacarpal and metatarsal fractures and fixation in metacarpal and metatarsal
osteotomies
• Tarsals fractures
• Transcondylar humeral fractures in children
3.5mm Cannulated Cortical Screws, Short Thread
| Length (mm) | Thread Length (mm) | Stainless Steel | Titanium |
|---|---|---|---|
| 10 | 4 | 7-120-10 | 7-120-10Ti |
| 12 | 4 | 7-120-12 | 7-120-12Ti |
| 14 | 5 | 7-120-14 | 7-120-14Ti |
| 16 | 5 | 7-120-16 | 7-120-16Ti |
| 18 | 6 | 7-120-18 | 7-120-18Ti |
| 20 | 7 | 7-120-20 | 7-120-20Ti |
| 22 | 7 | 7-120-22 | 7-120-22Ti |
| 24 | 8 | 7-120-24 | 7-120-24Ti |
| 26 | 8 | 7-120-26 | 7-120-26Ti |
| 28 | 9 | 7-120-28 | 7-120-28Ti |
| 30 | 10 | 7-120-30 | 7-120-30Ti |
| 32 | 11 | 7-120-32 | 7-120-32Ti |
| 34 | 11 | 7-120-34 | 7-120-34Ti |
| 36 | 12 | 7-120-36 | 7-120-36Ti |
| 38 | 12 | 7-120-38 | 7-120-38Ti |
| 40 | 13 | 7-120-40 | 7-120-40Ti |
| 42 | 14 | 7-120-42 | 7-120-42Ti |
| 44 | 14 | 7-120-44 | 7-120-44Ti |
| 46 | 15 | 7-120-46 | 7-120-46Ti |
| 48 | 15 | 7-120-48 | 7-120-48Ti |
| 50 | 16 | 7-120-50 | 7-120-50Ti |
| Length (mm) | Stainless Steel | Titanium |
|---|---|---|
| 10 | 7-130-10 | 7-130-10Ti |
| 12 | 7-130-12 | 7-130-12Ti |
| 14 | 7-130-14 | 7-130-14Ti |
| 16 | 7-130-16 | 7-130-16Ti |
| 18 | 7-130-18 | 7-130-18Ti |
| 20 | 7-130-20 | 7-130-20Ti |
| 22 | 7-130-22 | 7-130-22Ti |
| 24 | 7-130-24 | 7-130-24Ti |
| 26 | 7-130-26 | 7-130-26Ti |
| 28 | 7-130-28 | 7-130-28Ti |
| 30 | 7-130-30 | 7-130-30Ti |
| 32 | 7-130-32 | 7-130-32Ti |
| 34 | 7-130-34 | 7-130-34Ti |
| 36 | 7-130-36 | 7-130-36Ti |
| 38 | 7-130-38 | 7-130-38Ti |
| 40 | 7-130-40 | 7-130-40Ti |
| 42 | 7-130-42 | 7-130-42Ti |
| 44 | 7-130-44 | 7-130-44Ti |
| 46 | 7-130-46 | 7-130-46Ti |
| 48 | 7-130-48 | 7-130-48Ti |
| 50 | 7-130-50 | 7-130-50Ti |
| Length (mm) | Thread Length (mm) | Stainless Steel | Titanium |
|---|---|---|---|
| 10 | 5 | 7-140-10 | 7-140-10Ti |
| 12 | 5 | 7-140-12 | 7-140-12Ti |
| 14 | 5 | 7-140-14 | 7-140-14Ti |
| 16 | 5 | 7-140-16 | 7-140-16Ti |
| 18 | 6 | 7-140-18 | 7-140-18Ti |
| 20 | 7 | 7-140-20 | 7-140-20Ti |
| 22 | 7 | 7-140-22 | 7-140-22Ti |
| 24 | 8 | 7-140-24 | 7-140-24Ti |
| 26 | 8 | 7-140-26 | 7-140-26Ti |
| 28 | 9 | 7-140-28 | 7-140-28Ti |
| 30 | 10 | 7-140-30 | 7-140-30Ti |
| 32 | 11 | 7-140-32 | 7-140-32Ti |
| 34 | 11 | 7-140-34 | 7-140-34Ti |
| 36 | 12 | 7-140-36 | 7-140-36Ti |
| 38 | 12 | 7-140-38 | 7-140-38Ti |
| 40 | 13 | 7-140-40 | 7-140-40Ti |
| 42 | 14 | 7-140-42 | 7-140-42Ti |
| 44 | 14 | 7-140-44 | 7-140-44Ti |
| 46 | 15 | 7-140-46 | 7-140-46Ti |
| 48 | 15 | 7-140-48 | 7-140-48Ti |
| 50 | 16 | 7-140-50 | 7-140-50Ti |
| Length (mm) | Stainless Steel | Titanium |
|---|---|---|
| 10 | 7-150-10 | 7-150-10Ti |
| 12 | 7-150-12 | 7-150-12Ti |
| 14 | 7-150-14 | 7-150-14Ti |
| 16 | 7-150-16 | 7-150-16Ti |
| 18 | 7-150-18 | 7-150-18Ti |
| 20 | 7-150-20 | 7-150-20Ti |
| 22 | 7-150-22 | 7-150-22Ti |
| 24 | 7-150-24 | 7-150-24Ti |
| 26 | 7-150-26 | 7-150-26Ti |
| 28 | 7-150-28 | 7-150-28Ti |
| 30 | 7-150-30 | 7-150-30Ti |
| 32 | 7-150-32 | 7-150-32Ti |
| 34 | 7-150-34 | 7-150-34Ti |
| 36 | 7-150-36 | 7-150-36Ti |
| 38 | 7-150-38 | 7-150-38Ti |
| 40 | 7-150-40 | 7-150-40Ti |
| 42 | 7-150-42 | 7-150-42Ti |
| 44 | 7-150-44 | 7-150-44Ti |
| 46 | 7-150-46 | 7-150-46Ti |
| 48 | 7-150-48 | 7-150-48Ti |
| 50 | 7-150-50 | 7-150-50Ti |
