WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
2.4mm Adaption Straight Plate – 87.9mm in titanium, featuring 12 shaft holes and an overall length of 87.9mm. Supports 2.4mm cortical and locking screws. View sizes and catalogue references.
2.4mm Adaption Straight Plate – 87.9mm is a titanium plate in the StahlmannPro 2.4mm Hand System, available with 12 shaft holes and an overall length of 87.9mm. The specification table below identifies each listed configuration and its product reference, making it easier to match a quotation or replenishment request to the correct implant.
All holes are listed as supporting 2.4mm cortical and locking screws. The plate features compression and locking holes. Confirm the exact plate, screw and instrument combination against the applicable product documentation before use.
The adaption design is described as allowing bending in two directions and twisting to accommodate small-bone anatomy. Contouring must follow the applicable device instructions and instrument requirements; the catalogue does not give bending limits.
The catalogue lists non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges. These are catalogue indications, not a recommendation for an individual case. Suitability depends on clinical assessment and the current instructions for the specific device.
| Holes | Length (mm) | Titanium |
|---|---|---|
| 12 | 87.9 | 4-400-12Ti |
Send the selected catalogue references, quantities and delivery destination to StahlmannPro. Include any requirements for dimensional drawings, current device instructions and packaging information so the requested specification can be confirmed.
This plate is listed with 12 shaft holes and an overall length of 87.9mm. Use the specification table to match the required configuration to its titanium catalogue reference.
All holes are listed as supporting 2.4mm cortical and locking screws. Confirm the exact component and instrument combination in the applicable system documentation.
The catalogue lists non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges. The treating surgeon must assess suitability for the individual case.
This version measures 87.9mm and carries reference 4-400-12Ti. The catalogue also lists a 72mm version under 4-412-12Ti. Both have 12 holes, so use length and reference rather than the name alone.
Provide the product name, hole configuration, catalogue reference, length, quantity and delivery destination. The listed reference is 4-400-12Ti.
