1.5mm Hand System
The StahlmannPro 1.5mm Hand System includes titanium locking plates for the metacarpal and phalangeal fracture applications specified in our catalogue. The range brings together six plate designs with different lengths, hole arrangements and side options, helping surgical and procurement teams identify the required configuration.
Explore Strut, Adaption Y, Adaption T, Adaption Straight, Straight and Condylar Locking Plates. Each product has a specification table showing its listed dimensions and catalogue references. All six plate designs support 1.5mm cortical and locking screws, according to the system specifications.
Titanium Hand Plates and Available Configurations
Plate names identify the design, while the dimensions and product references distinguish the available versions. Compare the following configurations when preparing your product enquiry.
| Plate design | Hole configuration | Length | Available options |
|---|---|---|---|
| Strut Locking Plate | 8 holes | 23 mm | Right and left |
| Adaption Y Locking Plate | 8 shaft holes, 3 head holes | 47 mm | One listed configuration |
| Adaption T Locking Plate | 8 shaft holes, 3 or 4 head holes | 44.5 mm | Two head configurations |
| Adaption Straight Locking Plate | 6 or 12 shaft holes | 29 or 59 mm, respectively | Two lengths |
| Straight Locking Plate | 4 or 6 shaft holes | 23 or 36 mm, respectively | Compression and locking holes |
| Condylar Locking Plate | 6 shaft holes, 2 head holes | 36 mm | One listed configuration |
Plates for Metacarpal Fracture Fixation
The Adaption Y and Condylar Locking Plates are listed for metacarpal fracture fixation. The Strut Locking Plate is listed for both metacarpal and phalangeal fractures and offers separate right and left versions.
These designs have different head configurations and overall lengths. Review the individual specifications rather than selecting a plate by its general shape alone.
Plates for Phalangeal Shaft Fractures
The Adaption Straight and Straight Locking Plates are listed for non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges.
Their dimensions differ even when the hole count is the same. The 6-hole Adaption Straight plate measures 29 mm, while the 6-hole Straight Locking Plate measures 36 mm. The Straight Locking Plate also explicitly features compression and locking holes.
Adaption T Plate Configurations
The Adaption T Locking Plate has 8 shaft holes with a choice of 3 or 4 head holes. Both versions measure 44.5 mm. Its catalogue applications include proximal and distal extra-articular, partial articular and complete articular fractures of the hand.
When requesting this plate, specify the head hole count alongside the product reference. Length alone does not distinguish the two options.
Screw Compatibility Within the Hand System
The catalogue states that all holes in these hand plates support 1.5mm cortical and locking screws. The associated screw families are described as self-tapping with a star head.
Explore the 1.5mm Locking Screws category for the listed locking screw lengths and references. Confirm the exact plate, screw and instrument combination against the applicable system documentation. A matching nominal diameter does not establish compatibility with another manufacturer’s components.
