WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
2.0mm Locking Screw in titanium with a self-tapping design and star head. Available in 23 listed lengths from 6 to 40 mm, each identified by a separate 4-350 series reference.
2.0mm Locking Screw is listed as a self-tapping titanium screw with a star head in the StahlmannPro 2.0mm Hand System. The catalogue provides 23 individual length options from 6 to 40 mm.
The range includes every whole-millimetre length from 6 to 16 mm, followed by 18 to 40 mm in 2 mm increments. These are listed sizes rather than a continuous selection of every possible length. Locking screws use the 4-350 reference series and should be identified separately from cortical screws.
| Length (mm) | Titanium |
|---|---|
| 6 | 4-350-06Ti |
| 7 | 4-350-07Ti |
| 8 | 4-350-08Ti |
| 9 | 4-350-09Ti |
| 10 | 4-350-10Ti |
| 11 | 4-350-11Ti |
| 12 | 4-350-12Ti |
| 13 | 4-350-13Ti |
| 14 | 4-350-14Ti |
| 15 | 4-350-15Ti |
| 16 | 4-350-16Ti |
| 18 | 4-350-18Ti |
| 20 | 4-350-20Ti |
| 22 | 4-350-22Ti |
| 24 | 4-350-24Ti |
| 26 | 4-350-26Ti |
| 28 | 4-350-28Ti |
| 30 | 4-350-30Ti |
| 32 | 4-350-32Ti |
| 34 | 4-350-34Ti |
| 36 | 4-350-36Ti |
| 38 | 4-350-38Ti |
| 40 | 4-350-40Ti |
List each required length with its full 4-350 code and quantity. Confirm the selected plate’s compatibility and the matching driver specification. The source does not state driver size or establish that instruments are included with the screws.
The catalogue describes a 2.0mm locking screw with self-tapping design and star head, listed under Titanium. Each length has its own 4-350 series reference.
There are 23 lengths: 6 through 16 mm in 1 mm increments, then 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 and 40 mm.
Most listed 2.0mm hand plate pages explicitly state support for 2.0mm locking screws. Confirm the selected model’s documentation; the Rotation Correction page does not explicitly specify compatibility.
The source specifies a star head but does not give the exact driver size or instrument reference. Request the matching instrument specification before ordering.
Provide each length, complete reference and quantity. For example, 4-350-06Ti identifies the 6 mm locking screw and 4-350-40Ti identifies the 40 mm option.
