WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
1.5mm Cortical Screws with a self-tapping design and star head. Available in 15 catalogue lengths from 6 to 24 mm, with the original titanium-column product codes listed for each size.
1.5mm Cortical Screws are listed as self-tapping, star head screws in the StahlmannPro 1.5mm Hand System. The catalogue provides 15 length options in its titanium column, with a separate 4-260 product reference for every size.
The self-tapping cortical screws range includes 6 to 16 mm in 1 mm increments, followed by 18, 20, 22 and 24 mm. For buyers comparing titanium cortical screws, the complete table makes it possible to identify the precise listed size and reference without combining different lengths into one order code.
| Length (mm) | Titanium |
|---|---|
| 6 | 4-260-06 |
| 7 | 4-260-07 |
| 8 | 4-260-08 |
| 9 | 4-260-09 |
| 10 | 4-260-10 |
| 11 | 4-260-11 |
| 12 | 4-260-12 |
| 13 | 4-260-13 |
| 14 | 4-260-14 |
| 15 | 4-260-15 |
| 16 | 4-260-16 |
| 18 | 4-260-18 |
| 20 | 4-260-20 |
| 22 | 4-260-22 |
| 24 | 4-260-24 |
When requesting star head cortical screws, include each required length, product reference and quantity. The references below are reproduced exactly as listed, including their original suffix format. Confirm the plate and instrument requirements for the intended system when preparing your enquiry.
These screws are listed as 1.5mm cortical screws with a self-tapping design and star head. The catalogue places them under a Titanium column and provides individual references for 15 lengths.
The listed lengths are 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22 and 24 mm. Check the exact length and reference when preparing your enquiry.
Yes. The catalogue states that all holes in the six featured hand plate designs support 1.5mm cortical screws as well as locking screws. Confirm the complete component and instrument requirements for the intended system.
Cortical screws use the 4-260 series, while locking screws use the 4-250 series. For example, the listed 6 mm cortical screw is 4-260-06, while the 6 mm locking screw is 4-250-06Ti. Preserve the codes exactly as shown.
Specify 1.5mm Cortical Screws, Self-Tapping, Star Head, followed by each required length, catalogue reference and quantity. If instruments are also needed, request confirmation of the matching driver specification and whether it is included in the quotation.
