WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
1.5mm Locking Screws with a self-tapping design and star head. The titanium range includes 15 listed lengths from 6 to 24 mm, each with an individual catalogue reference.
1.5mm Locking Screws are supplied in the catalogue as self-tapping, star head screws within the StahlmannPro 1.5mm Hand System. The titanium range covers 15 listed lengths, starting at 6 mm and ending at 24 mm.
These self-tapping locking screws are identified by the 4-250 reference series. The size selection includes every whole-millimetre length from 6 through 16 mm, followed by 18, 20, 22 and 24 mm. The table below lists each available length and its complete titanium reference.
| Length (mm) | Titanium |
|---|---|
| 6 | 4-250-06Ti |
| 7 | 4-250-07Ti |
| 8 | 4-250-08Ti |
| 9 | 4-250-09Ti |
| 10 | 4-250-10Ti |
| 11 | 4-250-11Ti |
| 12 | 4-250-12Ti |
| 13 | 4-250-13Ti |
| 14 | 4-250-14Ti |
| 15 | 4-250-15Ti |
| 16 | 4-250-16Ti |
| 18 | 4-250-18Ti |
| 20 | 4-250-20Ti |
| 22 | 4-250-22Ti |
| 24 | 4-250-24Ti |
For star head locking screws, specify the exact length and matching reference rather than the size range alone. These titanium hand screws have separate product codes for each length. Include each requested code and quantity in your enquiry, and confirm the required plate and instrument compatibility for the intended system.
These screws are listed as 1.5mm locking screws with a self-tapping design and star head. The catalogue identifies titanium options across 15 lengths, with a separate reference for every size.
Available lengths are 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22 and 24 mm. Lengths of 17, 19, 21 and 23 mm are not listed in this catalogue.
The six featured 1.5mm hand plate descriptions state support for 1.5mm locking screws. Confirm the exact plate, screw and instrument combination against the applicable system documentation before use.
The catalogue identifies a star head but does not specify the exact driver size or instrument reference. Request the matching instrument specification before purchasing. A star head description alone is insufficient to confirm driver compatibility.
Use the complete 4-250 series reference for each required length. For example, the 6 mm screw is 4-250-06Ti, and the 24 mm screw is 4-250-24Ti. List each code separately with its quantity.
