WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
1.5mm Straight Locking Plate in titanium with compression and locking holes. Available in 4-hole / 23 mm and 6-hole / 36 mm versions, with support for 1.5mm cortical and locking screws.
1.5mm Straight Locking Plate is a titanium plate featuring compression and locking holes. The StahlmannPro catalogue lists two versions: 4 holes at 23 mm and 6 holes at 36 mm.
This compression and locking plate is part of the 1.5mm Hand System. All plate holes support 1.5mm cortical and locking screws. Its defining catalogue feature is the inclusion of compression and locking holes, alongside the two listed shaft-hole configurations.
The titanium straight plate is listed for non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges. The catalogue therefore places this model within the phalangeal diaphyseal fracture plate range.
| Holes | Length (mm) | Titanium |
|---|---|---|
| 4 | 23 | 4-208-04Ti |
| 6 | 36 | 4-208-06Ti |
Match the hole count to the required length when enquiring. The 4-hole plate uses reference 4-208-04Ti, and the 6-hole plate uses 4-208-06Ti. Include the complete reference and quantity to distinguish this model from the Adaption Straight plate.
The plate is listed for non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges. Selection depends on the fracture and the surgical team’s assessment.
Yes. The catalogue specifically describes this titanium plate as featuring compression and locking holes. The use of those features should follow the applicable system instructions and surgical plan.
The plate is available in a 4-hole configuration measuring 23 mm and a 6-hole configuration measuring 36 mm. These are separate catalogue items.
The catalogue states that all holes support 1.5mm cortical and locking screws. A matching nominal diameter alone does not establish compatibility with components from another manufacturer.
The 4-hole, 23 mm plate uses reference 4-208-04Ti. The 6-hole, 36 mm plate uses 4-208-06Ti. Include the complete reference and quantity when requesting a quotation.
