WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
1.5mm Adaption Straight Locking Plate in titanium, offered with 6 holes at 29 mm or 12 holes at 59 mm. Every hole supports 1.5mm cortical and locking screws for the listed phalangeal shaft applications.
1.5mm Adaption Straight Locking Plate offers two titanium options for the 1.5mm Hand System: a 6-hole plate measuring 29 mm and a 12-hole plate measuring 59 mm. Each configuration has its own product reference.
This titanium adaption plate is listed for fractures involving the shaft of the hand phalanges. All holes support 1.5mm cortical and locking screws. The two lengths and hole counts are shown together below to make comparison of the 6 or 12 hole locking plate straightforward.
The catalogue identifies non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges. These are the listed applications for this phalangeal shaft fracture plate.
| Holes | Length (mm) | Titanium |
|---|---|---|
| 6 | 29 | 4-206-06Ti |
| 12 | 59 | 4-206-12Ti |
For a quotation, specify both hole count and length: 6 holes / 29 mm or 12 holes / 59 mm. Include the corresponding reference from the table. The Adaption Straight model is a separate product from the 4- and 6-hole Straight Locking Plate in this range.
The plate is listed for non-comminuted, wedge-comminuted and comminuted diaphyseal fractures of the hand phalanges. Diaphyseal fractures involve the shaft of the bone. Clinical suitability must be assessed by the treating surgeon.
Two titanium configurations are listed: 6 holes with a 29 mm length and 12 holes with a 59 mm length. Each configuration has its own catalogue reference.
All holes support 1.5mm cortical and locking screws, according to the product specifications. Confirm the associated instruments and complete system requirements before use.
The Adaption Straight model offers 6-hole, 29 mm and 12-hole, 59 mm options. The Straight Locking Plate offers 4-hole, 23 mm and 6-hole, 36 mm options and explicitly features compression and locking holes.
Use 4-206-06Ti for the 6-hole, 29 mm plate and 4-206-12Ti for the 12-hole, 59 mm plate. Specify the code and quantity for each configuration required.
