WHX Miami 2026 "June 17–19, 2026 Miami Beach Convention Center, USA"
EUROSPINE 2026 "October 7–9, 2026 Gothia Towers & Svenska Mässan, Gothenburg, Sweden"
MEDICA 2026 "November 16–19, 2026 Messe Düsseldorf, Germany"
WHX Dubai 2027 "January 25–28, 2027 Dubai Exhibition Centre, UAE"
AAOS 2027 "March 3–6, 2027 Venetian Convention & Expo Center, Las Vegas, Nevada, USA"
1.5mm Strut Locking Plate in titanium for metacarpal and phalangeal fracture fixation. The 23 mm plate has 8 holes and is available in right and left versions, with support for 1.5mm cortical and locking screws.
1.5mm Strut Locking Plate is a titanium hand implant offered in right and left configurations. Both versions measure 23 mm and have an 8-hole layout, making the side designation the key difference when identifying the required catalogue item.
This titanium strut plate belongs to the StahlmannPro 1.5mm Hand System. Every plate hole supports 1.5mm cortical and locking screws. For teams comparing metacarpal locking plate options, the table below brings the hole count, side, length and titanium reference together in one place.
The catalogue lists fixation of metacarpal and phalangeal fractures as the intended use. This includes its role as a phalangeal fracture plate within the hand system.
| Holes | Type | Length (mm) | Titanium |
|---|---|---|---|
| 8 | Right | 23 | 4-200-08R-Ti |
| 8 | Left | 23 | 4-200-08L-Ti |
Specify Right or Left when requesting this plate. The two versions share the same length and hole count but have different catalogue references. Include the required side, reference and quantity in your enquiry.
The 1.5mm Strut Locking Plate is listed for fixation of metacarpal and phalangeal fractures. The treating surgeon determines its suitability according to the fracture pattern and the applicable device instructions.
The plate is available in titanium with an 8-hole configuration and a length of 23 mm. These specifications apply to both the right and left versions.
Yes. The right version uses catalogue reference 4-200-08R-Ti, while the left version uses 4-200-08L-Ti. Both have the same listed length and hole count.
The catalogue states that all plate holes support 1.5mm cortical and locking screws. Confirm the complete screw and instrument requirements for the intended system before use.
Specify the right or left version, its catalogue reference and the required quantity. Include your delivery destination and any documentation requirements so the enquiry identifies the exact plate needed.
